A Brief Introduction to Hot Fix Swarovski Rhinestones

by: genwright | Total views: 25 | Word Count: 513 | View PDF

Some consumers think that rhinestones are for jewelry that are meant to be worn. They may be pleasantly surprised to find that rhinestones can also be placed on fabric to enhance the design of clothing. They are known as hotfix Swarvoski rhinestones.

Swarovski crystals are a very special type of stone. They come in a vast array of colors - emerald for green, peridot for lime green, sapphire for blue, amethyst for purple, and ruby for red. When you see the name of a precious stone, you will be able to instantly associate a color with the name. They are the only precious stones with a diamond like appearance, except that they come in many different colors.

The translucent quality of the stones allow the light to be refracted within, giving it a beautiful glittering quality. Due to their naturally georgeous appearances, rhinestones are widely used in the fashion industry as accessories that help give the overall look a more elegant feel.

In addition to being used with chains and rings in jewelry that can be worn, rhinestones can also be used as precious stones that are placed on clothing. Hot fix Swarovski crystals come with glue at the back of the stones. When exposed to heat, the glue softens and the stones adhere themselves to the fabric. Heat can be applied with heat fix wand that come with applicators of various sizes.

Various sizes are required because rhinestones come in many different sizes. Crystal sizes are measured in "ss" (stone sizes). The smallest crystals are labeled as size ss5 (less than 2 mm) while the largest crystals are labeled as size ss48 (about 11mm). The choice of size depends on the design.

Before attaching hot fix Swarvoski rhinestones, always lay out the stones in its upright position, with the glue downwards. This allows you to make any changes to the design before the final attachments are done.

Once you are satisfied with the layout, select the right sized tip for your heat wand. Your heat want should come with hands free support that will help you pick up the stones with ease. This can prevent injuries that can be caused by contact with the heated wand. Do not force the rhinestone into the tip. Ease it gently into the tip and once the stone is in place, allow the tool to heat the stone for about 10 to 12 seconds. You should be able to see the glue become a shiny, lighter shade as it softens. Place the stone on the fabric, and remove the heat wand quickly. This is the time to make any final adjustments to the position if you want. But, remember to do it swiftly as the glue will stick in just a few seconds!

Once attached to the fabric, the rhinestones will look as if it's part of the fabric. Now every time you pick up the piece of clothing, a string of brilliant stones are already attached to it, giving it a unique and upscale look.

I hope you enjoyed this post by genwright, why not rate it below?

About the Author

Browse all sorts of Hot Fix Swarovski Crystals and Swarovski Hot Fix Rhinestones - High quality guaranteed.

A Brief Introduction to Hot Fix Swarovski Rhinestones Comments

Comments

No comments posted.

Add Comment